Rearz Safari Glass Adult Baby Bottle
Rearz first ever Adult Sized Baby Bottle! ♥
Printed in our famous Rearz Safari Glass Adult Baby Bottle animal print with an all glass bottle and fast flow vented silicone nipple, this bottle is a must have for your Adult Baby collection. Featuring Griffin the Lion, Zach the Zebra, Marty the Giraffe, Lilly the Hippo, Alex the Monkey and Johnny the Parrot.
Washing Instructions:
- Hand wash with regular dish soap.
- To extend the life of the print on the bottle we do not recommend machine washing. (Our tests have shown after 5 washes there was no visible fading after machine washing.)
Featuring:
- All Borosilicate glass bottle with a capacity of 450ml*
- Medical grade Silicone nipple
- Fast flow vented silicone nipple with X style hole
- Printed Bottle with our very own Safari animal print
- Measuring guide printed on side of bottle
- 2 Different Coloured Caps (Green & Red)
*- May accommodate more liquid then advertised
Contents:
- Glass Bottle – Printed
- Screw on Lid with Nipple
- Protective Cap
Starlight (verified owner) –
Amazing! The best bottle I have ever used. Way better than using an actual baby bottle.
thekaysier (verified owner) –
This IS AMAZING.
I LOVE the look of it, its super lovely in it’s prints and looks, and it holds a LOT! Nearly half a litre!
I’m really happy with it.
CokauToulk4tnske (verified owner) –
The bottle works well as intended.
I love the design, and the materials seem to be sturdy enough to handle some rough-ish handling. the threading on the bottle and lid make it nice and watertight when it seals against the teat, I’ve had this in bed before and the only wetness has been from condensation on the outside of the bottle rubbing off on stuff. The protective cap is vented (maybe to prevent overpressure with heated liquid?) but is still quite tough.
The prints so far have held up well, with no notable(/visible) fraying, tearing coming apart, fading, peeling or other defects. They do seem to be a separate element on top of the glass, you can feel it is a rougher material (almost like paper) and does sit on top of the glass. It does seem to be significantly thinner than a regular sticker. The quality, while by no means an objective measure (only used for about two weeks*) it has been in the presence of some extreme condensation as I’ve put ice in to create some more ‘adult’ beverages. The actual fluid capacity seems to be 500ml, tested by putting a full can of drink advertised as 500ml, though this brings the level up into the threading/necked section of the bottle.
speaking of the threading, it has four separate ‘threadlets'(?) which is probably the best way I can describe them. they have a pretty aggressive pitch, but locates super easily and rotates smoothly on the cap to produce a good clamping force in just a 180deg twist.
The nipple took some getting used to. I’m personally not very experienced, and had some trouble extracting contents in a meaningful manner, but did end up getting the hang of it somewhat.
Now for the not so good:
I wouldn’t feel comfortable having this over a tiled or concrete floor, especially while particularly.. “clumsy”. I found that drinking from it was difficult, especially when starting out, mainly due to the rigidity of the bottle. I found myself trying to squeeze the sides rather than focus on just sucking it, but I figured it out within a week. (*)The nipple for me has broken, which has paused my ability to test the durability of other items associated with it which is a bit unfortunate. I do have another teat on the way but was definitely disappointed with the lack of replacements available on this site (maybe a me problem) I would have liked an option to buy two to three replacements of the same design, but could only find the specialty nipple which I will likely leave a review on once I get it.
While I know that Littles Downunder as a distributor likely doesn’t have too much control over Rearz, I believe having a transparent (or even different patterned) rubberised sleeve that could fit over the bottle and maybe lock up/be seated against the cap could alleviate both condensation concerns and add some resistance against shattering which would provide an immense peace of mind.
four out of five star – TLDR;
Bottle holds water, Doesn’t leak. Threads are good and easy to use. Very worried about dropping the bottle, could be better with a cover/sleeve. Printing is cute and seems durable.